Tag Archives: off road truck stuff

quad 4x4 water crossing

Scuba Steve Drives an FJ

…the water was exceptionally wet with the rain, heavy snow melt and oceans rising from the global warming. As the water in the rivers crested and levies broke, flood waters rushed over everything west of the Pacos. The only hope for saving the orphans was Scuba Steve riding high in his FJ Cruiser. Crossing the high water in his Voodoo Blue wet suit, Scuba Steve saved the children and Sister Mary Knuckle Buster, driving them to higher and dryer ground… it could happen!

But before it did, we would want to relocate the rear differential and E-Locker’s breather to a higher and hopefully drying location. You can read the horror stories on the forums about rigs who got water sucked in through the breather and the dollars it took to pull the fish out of their rear end. You can also read how simple it is to relocate you breather, with the list of parts and instructions.

After running a number of wet off-road adventures this winter and pushing my H2O luck with some crossings, I finally took the plunge and performed the famous Scuba Mod on the Last Great Road Trip’s Rig. As the video shows, it was a simple process of pulling a length of hose down from the gas fill area to the rear frame, zip tie it here and there, pull the stock breathers, hook it all together with a handy little T-connector and put the original breather on the hose end back in the gas fill where is all began. Waalaa Scuba Mod.

While we may not be called in, like Scuba Steve, to save a house full of orphans or the Hooters bikini car wash girls, we can feel confident in navigating some water crossings that previously had us a bit nervous.

fj cruiser baja racer

Not Your Mother’s Headlights

baja designs off-road lightsWhen we started planning for the Baja off road adventure we know we would need some serious lighting if we were going to explore the desert at night. Not wanting to take any chances we looked at a lot of manufactures’ lighting systems. After months of painstaking analysis and research, reading through magazines (looking at pictures), going through forums, stopping at 4×4 shops and talking to anyone who would listen, we decided to go with Baja Designs’ Soltek setup.

We choose these lights for their crystal clear optics, high quality electronic components, no-tool adjustments and a mounting system that isolates vibration. They also weep testosterone on the pages of Hula Betty’s magazine.

Need more information… How about our PDF write-up over on ISSUU on installing off-road lights to go along with the video.

Even more information… Must read, step by step Toyota Bulletins:

Relay DiagramAnother little tidbit that is handy to refer to is a relay diagram when you’re trying to remember all the different wires going from here to there. This is a nice reference:

If you still need MORE… drop us a comment with your question and let us know if you like the format and what we can add to help others when it comes to off road light selection and installation.

baja design roof lights

Baja Designs Joins in Supporting The Adventure

fj cruiser baja racerWe are very pleased to have Baja Designs as the newest sponsor of our off-road adventures.

When we went looking for auxiliary off-road lights for the rig, we spent a great deal of time researching the various technologies, available products and the companies behind those products. What we found from painstakingly analyzing our off-road lighting needs and asking for input from a number of experts is that Baja Designs has been developing top quality high-end aftermarket lighting systems for the off-road race industry for 14 years. Baja Designs also offers a 3 year warranty on their Soltek Fuego 4″ and LaPaz 8″ lights. These guys stand behind their products. Legendary quality lights, warranty protection, crystal clear optics, one-of-a-kind tool free aiming system and guys that know the Baja like the back of their hand, oh yeah these lights are for us.

When we contacted Chris Chapman at Baja Designs, asking for assistance and sponsorship support we were ecstatic to hear that they would help us out. These are the same guys who are the official sponsors for the American Honda’s off-road team; we are in good company.

Over the coming weeks look for how to install off-road lights as we discuss the lighting basics and mount our two Fuego 4″ HID Lights on our Rig’s bull bar and four 8″ Soltek HID Lights on the roof.

hi-lift jack mount fj cruiser

How Do You Get to Carnegie Hall…

Everyone knows the old joke… A tourist pulls up to a man on the corner and asks: “How do you get to Carnegie Hall?” The man on the corner says “Practice… practice… practice”

That is good advise and especially important when you are stuck on the trail. This is not the time to unwrap your shinny equipment for the first time and try to figure out how to use it. More than likely when you get stuck it will be dark, rainy and muddy or sandy, glaringly hot and windy (isn’t that what you went out to find). Stuck in these conditions is exactly what recovery equipment was designed for and when used correctly, will make easy work of a tough situation.

One of the most versatile and low cost pieces of off-road adventure recovery equipment is the hi-lift jack by the Bloomfield Manufacturing Company. The hi-lift jack can be used to lift or pull a rig out of the mud. It can be used to break a tire bead or push a panel into place. The hi-lift jack can even be used to change a tire. However, it can also put the rig into an unstable and unsafe position if the directions and safety instructions are not followed.

If you understand and practice how to use the hi-lift jack properly it can be one of the best pieces of recovery equipment you have with you on the trail.

yukon car ferry

Landing at Your Launching Point

So you’ve got your great adventure driving through Chile all planned out. You’ve tuned up your rig, dug up all your gear, and mapped out your route. Now you’ve just got one minor problem: that big red dot marked “START” on your map is at the foot of the Andes, while your rig is getting the neighbor kid’s basketball bounced off of it in your driveway in Hoboken. Getting your vehicle to your launch point can be a challenging task, but given the proper time, preparation, and precaution, this process doesn’t have to be such an adventure.

Before you even start to look at how you are going to get your rig to that big red dot, you should make sure that doing so is actually feasible. Every country is going to have its own vehicle standards and import regulations. A good starting point when researching these issues is the State Department’s list of Web Sites of Foreign Embassies in the U.S. These usually have links to the relevant regulatory entities in each country. Make sure that your vehicle will be street legal and that you will have the resources and parts to make repairs.

By Land
So now you’ve done a little homework, and it is time to figure our how you are actually going to get your trusty rig to the origin. Your adventurous instinct might tempt you to just pick up and drive all the way to Chile, but chances are that time, money, and your spouse may push you to look for other options. Travel can get expensive, and every border you cross could present you with any number of surprises. If you get delayed, you might not make it in time to complete your Chilean quest.

If you aren’t going to move your vehicle from behind the wheel, you are probably going to be looking at paying someone to do it for you with some combination of land and sea transport. This is where advance planning is going to be critical. The more flexible you can be with your time-frame, the more affordable shipping should be. If you are lucky enough to live on the coast, you should be able to save some time and money by getting your rig to the docks yourself. Otherwise, you are looking at some domestic shipping, which in itself could require about a month of advance planning. Some international shippers will be able to cover this domestic leg of the trip as well, and this consolidation of services can simplify the process considerably.

By Sea
Your vehicle will likely spend the maritime portion of its voyage in an enormous box shipping container with other vehicles. If you are extremely protective of your rig, you may want to shell out some extra cash for a private container. One other high-end option is a cruise ferry. This is essentially a combination of a roll-on/roll-off (RORO) freight ship and a luxury cruise liner. In addition to a steep price, this option also may leave you with little flexibility regarding timing and destinations. As an advantage, however, this option also moves something else you will need on your trip: you! If you can swing the cash, you’ll be able to ride in style.

There are any number of companies that provide international auto transport. When choosing a shipping carrier, make sure to do some research to ensure that they are a reputable company with the necessary registrations and licenses. Find out what parts of the customs process they can handle for you. Shipping brokerages and auction sites can be useful in finding the right shipper for your needs.

You can save yourself a lot of hassle by starting your trek from your incoming foreign port. If your origin is landlocked, however, you may need to secure shipping within a foreign country. The difficulty of this task depends a lot upon the level of development in that country and your comfort with the foreign language. In more developed areas, you may be able to arrange something online, but in a developing nation, you might have to make some arrangements in person.

By Any Means Necessary
If all this sounds a bit too daunting, don’t be afraid to get creative. Does it make more financial or logistical sense to purchase a new or used vehicle at the origin? Maybe you can find a fellow adventurer that already has a vehicle on location. Perhaps you could trek together or use the vehicle when they are done and split the cost of shipping. Find some adventure forums and see what other travelers have done.

Don’t let getting there be the whole battle. Plan ahead and work within your means. You’ll be chugging along towards that “FINISH” dot before you know it.

Written by Adam Greenspan of uShip, an auction-style marketplace for Auto Transport.

FJ Cruiser dimensions drawing

The Rig That Gets Under The Skin

Today was a good day! Planning for an off road adventure takes a lot of work… no matter what my wife, Hula Betty, says about my playing around on the Internet. One of the areas to plan for is rig maintenance, modifications and inevitable breakage. A big part of this effort is having the original manufactures specifications for electrical and mechanical components. And out of shear dumb luck I came across these great resources:

With these manuals, we should be able to better plan for some of our upcoming mods including auxiliary lights and a low gear transfer case.

Than there is the just plain cool stuff. How do you sell a new car model? You put out a retro coffee table book, FJ Magazine, and send it to dealers along with a FJ Cruiser new car features that provides a technical explanation of the construction and operation of new mechanism and technologies used in the new FJ Cruiser. And finally include a 2007 Toyota FJ Cruiser specification sheet  and FJ Cruiser product reference guide which shows off the best features of the vehicle against the competition. And Wala! You have product launch.

I’ve never had a rig that got under my skin like this one. Maybe it is the history, the vehicle quality or the rugged go anywhere ability… but this rig is still cool and one of the reason we started our off road adventures.

voodoo 2007 toyota fj cruiser

NASCAR Called… They Want Their Stickers Back

2007 toyota fj cruiser dirtSo today we stickered-up the rig. We had Steve over at Anderson Brothers take the web site banner and turn it into a vinyl graphic for the rig. The guys there did a great job creating a 70″ long vinyl sticker. The sticker gives the rig a real one-of-a-kind look.

2007 toyota fj cruiser in fieldAlong with Last Great Road Trip sticker, we added our sponsors stickers as well. Sway-A-Way, are the guys who make the coil overs and shocks we are running. The 2″+ lift the SAWs added and the great ride have convinced us that we made the right choice. These have performed well on the trails so far. The Haul Road will really put them to the test and I’m sure they will make the 800 miles of dirt and gravel much more bearable.2007 toyota fj cruiser field arb bumper

Mark at Metal Tech installed those SAWs and put on the bull bar, winch and fog lights along with a very nice custom fabrication that keeps those big tires from rubbing (aka body mount chop).

If you spot our rig driving around, honk and let us know you’ve seen us on the web. Honk for Diversity.

2007 toyota fj cruiser arb bumper

Daddy Needs a New Pair of Shoes

Jon and Jo Ann asked for a quick picture of the Rig to show its new off-road adventure tires. These are testosterone spitting, mud throwing, big beefy tires on the top side of 33 inches tall. Six Toyo’s Open Country M/Ts.  Did I mention I had to buy Six… Haul Road is famous for chewing up tires and spitting them out but it waits until you are 300 miles from the closest service center. Les Schwab came through with a little tire love to help the adventure.

If the off-road trail looks familiar ask Jo Ann and Jon how to get there… and bring your work gloves they have a few rocks that need moving.

2007 toyota fj cruiser arb bumper

Road Trip Adventure Talk

Their is no cell coverage on the Haul Road and many stretches of roads along the way to the Arctic Circle. On these roads and most off-road adventures the life line is maintained by CB radio with the truckers watching out for each other on channel 19. To keep in touch, hear warnings, and provide assistance if needed we picked up a CB radio with the weather channels.

The CB mod was one I did myself based on the posting of bigbill25 on the FJCRUISERforums.com. Thanks to bigbill25 and others on the thread selecting the right equipment and installation was straight forward. I did take one major deviation from the postings. I ran the coax cable through the inside, rather than under along the frame. My route followed the tail light wire bundle. By following Toyota’s cable route I was able to take advantage of the protection put in place to ensure wires don’t get crushed, stripped or pulled out.

The CB is a one hand unit so it can be installed without much room. In fact with everything tucked into place, no mounting was required and we kept the OME look. The antenna is now tuned for the radio and tuning a CB antenna turned out to be pretty straight forward once we picked up the SWR meter.

The mod tally is now at five with:

  • Sway-A-Way coil over shocks
  • ARB bull bar
  • Warn 9.5 XP winch
  • Wilderness rack
  • Cobra 75WXST CB
travis lt metal tech arb bumper install

Build A Better Mouse Trap For An Off Road Adventure

lifted toyota fj cruiser arb bumperWhat makes me think I can build a better Toyota FJ Cruiser than the engineers at Toyota? Well I’m not hampered by the need to please a large demographic and ensure the rig meets marketing, budget and focus group requirements set forth by the starched shirt corporate bean counters. No, I just need to ensure the mods register high on my cool meter… and they do!

mark hawley metal tech sway-a-way coiloverAs I mentioned we made a run down to Portland to see our friends at Metal Tech. The guys at Metal Tech are great and by guys I mean Mark and LT the owners of Metal Tech. They put on a new Sway-A-Way Coil-Over Shocks, ARB bull bar, IPF fog lights and a Warn winch. And for a guy like me it was great because Mark knows and enjoys chatting about everything FJ from 40s, 80s and Cruisers . He also let me hang around like I was a real motor-head.

Now those of you who remember, I started out looking to get an Old Man Emu coil-over shock set. Everyone I talked to said they are good for the type of terrain and driving we plan to do on this off-road adventure. Mark had even pre-staged the font shocks in perpetration for the install. Then when I got there I had to ask about the Sway-A-Ways (SAWs for those in the know). He explained how they are hand build and exclusively tuned for the FJ. The SAWs have 7/8” shafts, 2.5″ diameter shocks and they are completely re-buildable. Of course once I started asking Mark explained he did have one last set I check out and that was all it took. Ok let me be the first to admit it… I upgraded to the SAWs because they are high on the cool factor and I get instant off-road trail cred showing up with these bad boys. On the performance, as a result of adding the SAWs, the ride is great. Stiff enough to make handling a dream without jarring my teeth loose. The increased travel is very visible with the rig now sitting two and half inches taller. The cool SAW logo visible at the top of the shock is bonus.travis LT metal tech lift install

The ARB bull bar Mark and LT added rides nice and straight with the SAWs in place and holds the Warn 9.5 XP winch. In order to reduce a little weight the guys swapped out the winch cable for a synthetic line. The synthetic line is the same stuff I run for the dogs tug lines when we go mushing in the winter.

2007 toyota fj cruiser arb bumperThe whole set of mods really work as a package. The grill and front will now be protected from any deer, moose, bear or big foot that jump out in front of us. This is a big plus over the five pounds of plastic that was replaced. The little IPF fog lights will hopefully allow us to see and be seen a little better and avoid hitting the critters all together.

tavis lt toyota fj40 flexingWith all the new travel and lift there is always the temptation to test out the next bolder path or sand trap. To make sure the rig doesn’t get stuck the Warn winch should be just the ticket to pull our way out. But as everyone knows the winch is probably your last resort. Often a few shovel fulls of dirt moved from here to there can do the trick and get you unstuck. But just in case the shoveling doesn’t work we now have the winch.

Ok the rig is moving up on the cool factor meter, but take a look at LT’s rig. He and Mark really know their stuff and put it to work on their Toyota trucks as well as everyone they help. Thanks Guys.